Operation Manual

82
4.5.5 Navigation settings
You can control how IGO 8 behaves during navigation. Tap the following buttons: , ,
.
Button Description
Keep Position on Road
This feature allows car drivers to always correct GPS position errors by
matching the vehicle position to the road network.
For pedestrian navigation, this feature is automatically disabled to let the
software show your exact position.
By turning off this feature you also turn off the GPS position error filtering.
The position shown on the map will be subject to all position errors and
position fluctuations.
Off-route Recalculation
This switch tells IGO 8 whether to automatically recalculate the route when
you deviate from it. If this feature is turned off, you need to initiate route
recalculation manually otherwise navigation will be stopped until you return to
the originally recommended route.
Setting another point than the current GPS position as the start point of the
active route will automatically disable this feature.
Restore Lock-to-
Position
If you have moved or rotated the map during navigation, this feature moves
the map back to your current GPS position and re-enables automatic map
rotation after the given period of inactivity.
Automatic Overview
This feature switches the map view to Overview mode when the next route
event is at a distance. Overview is a zoomed out 2D view to let you see the
surrounding area. You have the following controls for Automatic Overview:
• Turn Distance for Overview: The map view will be switched to
Overview mode if the next route event is at least as far as this value.
• Default Zoom Level: Overview mode will appear with this zoom level.
You can scale the map in Overview mode but next time Overview
appears again, this zoom level will be applied.