Operation Manual

76
Button Description Reference
You can fine-tune the appearance and content of the Map
screen.
page 77
You can adjust the sounds of IGO 8. page 78
These settings determine how routes will be calculated. page 79
These settings allow you to customise the application for your
local language, measurement units, time and date settings
and formats, as well as to choose the voice guidance profile
you prefer.
page 81
You can control how IGO 8 behaves during navigation.
page 82
You can enable some useful warnings, and disable the touch
screen in a moving vehicle with Safety Mode.
page 83
You can set up the connection to the GPS receiver.
page 84
You can set up the connection to the TMC receiver. If the
TMC receiver is working, you can select the radio station to
be received.
page 84
You can modify the look and behaviour of the Menu screens.
page 85
You can fine-tune device related settings in this menu.
page 86
You can set up automatic Track Log saving and fine-tune
related settings.
page 87
This screen has no navigation feature. It merely provides
information about the maps and licenses included with your
navigation system.
You can switch to Simple mode. In Simple mode only a few of
the above settings are available. The rest of the settings are
set to values that are optimal for typical use.
page 10