Operation Manual

67
Button Main function (single tap) Function (tap and hold)
When a TMC receiver is connected to IGO
8, this button opens the list of TMC
messages, and provides access to the TMC
Settings and the radio station settings
screens.
n/a
4.1.9 TMC Events screen
You can access the list of TMC events, change TMC related settings, and select or ignore specific
radio stations in the Quick menu. Tap the following buttons:
, and then
.
The list of current TMC events is displayed first, ordered by their distance from your current position.
To change the content or the list or the sequence of the list items, tap
:
Button Description
Sort Events by
Sort the list of TMC events in the following ways:
• Distance: The list is ordered by the distance of the TMC event in a
straight line from your current GPS position.
• Road Name: The list is ordered by the name of the road concerned
by the TMC event.
• Type: The list is ordered by the type of the TMC event.
Event List
The content of the TMC event list can be filtered:
• All Events: All TMC events received by IGO 8 appear in the list.
• On Route: Only TMC events concerning a part of your active route
appear in the list.
To check the currently received FM radio station, to exclude radio stations or to manually tune to a
radio station, tap
:
Button Description
Use Auto-tuner If Auto-tuner is enabled, the tuner of IGO 8 sweeps through the FM CCIR
radio band searching for a TMC signal. The first station with TMC data will
be used automatically. When no TMC signal is available, the tuner keeps on
searching. Turn off Auto-tuner to select a radio station manually.
,
When Auto-tuner is turned off, search for the desired radio station manually
with these buttons.