Operation Manual

66
4.1.8 Quick menu
The Quick menu is a selection of controls that are frequently needed during navigation. It can be
opened directly from the Map screen by tapping
.
If you tap any of the switches in the Quick menu except for the Vehicle type, the Map screen
immediately returns. A switch is on if its lamp is lit. The Vehicle type button is different. It is a multi-
value button. It opens a list of available choices, and the symbol of the selected vehicle is shown on
the button.
Button Main function (single tap) Function (tap and hold)
Master Volume slider Adjusts the sound volume of the device. All
sounds of the application are affected.
n/a
If you only adjust the volume, you need to
use this button to return to the Map screen.
Opens the Navigation menu.
Mutes all sounds of IGO 8. Opens Sound settings.
Switches between the daytime and night
colour schemes manually. This will not
disable the automatic switching between the
two schemes: the other colour scheme
returns at the next scheduled time.
Opens Colour Profiles settings.
3D buildings can be displayed on the map.
Use this switch to suppress them
temporarily.
Opens 3D Settings.
Tap this button and select the Vehicle type
to be used for route calculation. Otherwise it
is selected in Route Planning options in
Settings (page 79).
Cha
nging the Vehicle type triggers an
automatic route recalculation.
Opens Route Planning options.
Turns track log recording on or off otherwise
controlled on the Manage Track Logs
screen.
Opens Manage Track Logs.
Opens the GPS Data screen with satellite
information, data coming from the GPS
receiver, and a shortcut to the GPS Settings
screen if needed (GPS receiver detection is
automatic).
n/a