Operation Manual

64
When you open the screen, all route data fields contain information about reaching your final
destination. Tap
and the fields concerning your route display data for the
next via point. Tap the button repeatedly to toggle between the two options.
You have the following data and functions on this screen:
Name Description Function
or
Shows whether the route data fields
show information about the final
destination (checkered flag) or about the
next via point (yellow flag) .
Field next to the flag Shows the name or number of the
current street or road.
Turn Preview Shows the type and distance of the next
route event.
Compass Shows the current heading. Tap this field to show it on the
map screen in one of the Trip
Data fields.
Speedometer Shows the current speed both
graphically and as a number.
Tap this field to show it on the
map screen in one of the Trip
Data fields.
Distance Remaining Shows the distance you need to travel
on the route before reaching your final
destination.
Tap this field to show it on the
map screen in one of the Trip
Data fields.
Time Remaining Shows the time needed to reach the final
destination of the route based on
information available for the remaining
segments of the route. The calculation
cannot take into account traffic jams and
other possible delays.
Tap this field to show it on the
map screen in one of the Trip
Data fields.
Arrival Time Shows the estimated arrival time at the
final destination of the route based on
information available for the remaining
segments of the route. The calculation
cannot take into account traffic jams and
other possible delays.
Tap this field to show it on the
map screen in one of the Trip
Data fields.
GPS Time Shows the current time corrected with
time zone offset. The accurate time
comes from the GPS satellites, and the
time zone information comes from the
map or it can be set manually in
Regional settings.
Tap this field to show it on the
map screen in one of the Trip
Data fields.
Altitude
Shows the elevation if it is provided by
the GPS receiver.
Tap this field to show it on the
map screen in one of the Trip
Data fields.
Speed Limit
Shows the speed limit of the current road
if the map contains it.
Tap this field to show it on the
map screen in one of the Trip
Data fields.
Opens a new screen with three
resettable Trip Computers.
Tap this button to change the
content of the Route Data fields to
show information about the next
via point.