Operation Manual

63
Name Description Function
Time Left Shows the time needed to reach the final
destination of the route based on information
available for the remaining segments of the route.
The calculation cannot take into account traffic
jams and other possible delays.
Tap this field to change
the content of all data
fields to via point
information.
Method
This field shows how the route was calculated. It
either displays the Route Calculation Method or
the Vehicle field from the Route Planning options.
If you have chosen Car, Taxi or Bus, the type of
the route (Fast, Short, Easy or Economical) will be
displayed here; if you have selected Emergency,
Bicycle or Pedestrian, this information will be
displayed here.
Tap this field to change
the content of all data
fields to via point
information.
Warning icons
In these square fields graphical symbols are
displayed in case warnings are attached to the
planned route. These are warnings, so icons
always show information for the whole route, even
if the data fields display values from your current
position to a via point only.
Tap any of the icons for
an explanation.
Opens the Route
Planning options screen
from theSettings menu.
Opens the map screen
designed for route
planning.
Appears only if at least one via point exists. Deletes the next via
point from the route.
Appears only if there are no via points in the route. Deletes the active route.
4.1.7 Trip Information screen
The Trip Information screen has both route and travel data you might need during your journey. It can
be opened directly from the Map screen by tapping the Trip Data field (
).
The fields on this screen are continuously updated while you keep the screen open.