Operation Manual

41
• You can also search in postal codes. This is useful when a street name is common and it is
used in several districts of a city.
3.1.3 Selecting the destination from your Favourites
You can select a location that you have already saved as a Favourite to be your destination.
The procedure is explained starting from the Navigation menu.
1. Tap the following buttons:
(Simple mode) or , (Advanced
mode).
2. Tap the Favourite that you want to set as your destination.
3. The map appears with the selected point in the middle. Tap
(Simple
mode) or
(Advanced mode) from the Cursor menu. The route is then
automatically calculated, and you can start navigating.
3.1.4 Selecting the destination from the POIs
You can select your destination from the POIs included with IGO 8 or from the ones you have
previously created.
The procedure is explained starting from the Navigation menu.
1. Tap the following buttons:
(Simple mode), or , (Advanced mode).
2. Select the area around which the POI should be searched for:
•
: The POI will be searched for around a given address.
•
: The map appears with the Cursor in the middle. Modify the location of the Cursor
if necessary, then tap
. The POI will be searched for around the
given location.
•
: The POI will be searched for around the current GPS position.
•
: The POI will be searched for around the destination of the active route.
•
: The POI will be searched for not around a given point, but by the size of
the detour it adds to the active route. This can be useful if you search for a later
stopover that causes only a minimal detour, for example upcoming petrol stations or
restaurants.