Operation Manual

The following options are available in Advanced mode only:

Button Action

In the active route, uses the Cursor as the start point by replacing the

current GPS position (available in Advanced mode only)

Creates a new route with the Cursor as the destination. The previous route

(if exists) is deleted.

In the active route, uses the Cursor as a via point (an intermediate

destination) preceding the destination (available in Advanced mode only)

In the active route, uses the Cursor as the destination while keeping the

previous destination as a via point (available in Advanced mode only)

Shows the different routes calculated by the available routing methods.

Choose the one that suits your needs the best (available in Advanced mode

only)

Marks the map with a Pin at the Cursor (available in Advanced mode only)

Saves the Cursor as a POI (available in Advanced mode only)

Saves the Cursor as a Road Safety Camera location (available in Advanced

mode only)

This button is not displayed when GPS position is not available or if you are

in certain countries where Road Safety Camera warning is prohibited. Even

if the button is available, you are responsible for checking whether it is legal

to use this feature at your location.

2.4 IGO 8 concepts

2.4.1 Smart Zoom

Smart Zoom provides much more than just a usual automatic zoom feature:

• While following a route calculated by IGO 8: when approaching a turn, it will zoom in and

raise the view angle to let you easily recognise your manoeuvre at the next junction. If the next

turn is at a distance, it will zoom out and lower the view angle to be flat so you can see the

road in front of you.

• While driving without an active route in IGO 8: Smart Zoom will zoom in if you drive slowly

and zoom out when you drive at high speed.

Enabling Smart Zoom

Tap the map to let the map control buttons appear, and then tap to enable Smart Zoom.