Operation Manual

19
The following area appears next to the above described rounded area. When tapping this area, the
result depends on the information currently shown.
Icon Information Details Action
There is no valid
GPS position
If there is no valid GPS
position, this symbol appears
here.
Tap this area to open
the GPS Data screen to
check the signal status
or the connection
settings.
Traffic restriction When GPS position is
available but there is no route
to be navigated, the traffic
restriction of the upcoming
intersection is shown here if
there is any.
Nothing happens if you
tap this area of the
screen.
,
Second route event
(manoeuvre after
the next
manoeuvre)
When GPS position and an
active route are both
available, this field shows the
route event that follows the
next route event shown in the
above described area.
Tap this area to open
the Itinerary screen with
the turn by turn
guidance instructions.
Approaching a
Road Safety
Camera
This icon appears when you
are approaching a Road
Safety Camera, and the
warning for cameras is
enabled in Settings.
Tap this area to
suppress the audible
camera warning.
Tap again to display the
second route event with
the possibility to open
the Itinerary.
Stops the running
simulation
This icon appears during
Route Fly Over, Route
Simulation, and Track Log
playback.
Tap this area to stop the
simulation.
Route recalculation
progress
During route recalculation,
this field shows the
recalculation progress
between 0% and 100%.
Nothing happens if you
tap this area of the
screen.
Indicator strip
- sounds muted/enabled
- Track Log recording
- TMC status
Tap this area to open
the Itinerary screen with
the turn by turn
guidance instructions.