Operation Manual

14
2.3 Using the map
The map screen is the most frequently used screen of IGO 8. It can be accessed from the Navigation
menu by tapping
.
For further information about the map screen, see page 51.
2.3.1 Checking the details of a map location
• If you are interested in the details of your current position during navigation:
1. Check the bottom line of the map. It shows the current street and house number
information.
2. For further details, tap
to open the Position menu.
3. Tap
. The address, the coordinate and the list of nearby POIs
will be displayed.
• You can check the details of any other location by selecting it on the map:
1. Tap the map anywhere to open the map control buttons.
2. Tap the desired location on the map. The Cursor (
) appears there. The address of
the location is displayed at the bottom of the map.
3. For further details, tap
to open the Cursor menu.
4. Tap
. The address, the coordinate and the list of nearby POIs
will be displayed.
• It is even easier if you select the desired point in the Find menu. Then the Cursor menu opens
automatically. You only need to tap the
button.