Operation Manual

13
think safe
USER MANUAL ELECTRONIC LOCK BASIC
1.
Press and hold the key ‘3’ until the red LEDs flash permanently
3
2.
Enter your 6-digit master code e.g. 567891
567891
Step Action Key
1.
Press and hold the key ‘1’ until the red LEDs flash permanently
1
2.
Enter your 6-digit master code e.g. 567891
567891
3.
Enter the new 6-digit user code e.g. 111111
111111
4.
Re-enter the new 6-digit user code e.g. 111111
111111
Step Action Key
2.2 Programming the user code
The master is able to program the user code, but not vice versa.
• A new user code will be allowed only if the code is differing in two places by a single digit from an existing
code.
2.3 Deleting the user
The master is able to delete the user, but not vice versa.
Step Action Key
1.
Press and hold the key ‘0’ until the red LEDs flash permanently
0
2.
Enter code e.g. factory code 123456
123456
3.
Enter your new 6-digit code e.g. 567891
567891
4.
Re-enter your new 6-digit code e.g. 567891
567891
2.1 Changing the master or user code
After entering the new code, the electronic lock should be opened and locked several times with the safe
door opened.
2. Master and user code