Installation Guide

2”
2”
Hinges
Next attach the upper and lower hinges to
the gate by:
 First laying the gate on a non-scratch
surface with the in-swing side of the gate
facing up
 Position the hinges on the gate hinge
side vertical beam as shown and attach
each hinge using 4 self-drill screws.
Next attach the gate to gate
post by:
 Positioning the gate as-
sembly in gate opening
in the orientation you se-
lected earlier. Using
scrap pieces of wood
shim the gate to the
proper height so that the
top of the gate is flush
with the top of the fence
on the gate post side.
 Attach the gate hinges to
the gate post by using 4
self-drill screws on each
hinge.
Shims
Gate Flush with top of Gate Hinge Post