>,3*64, 1 Thank you for buying the MM03i handset, you will love this new experience. For the most updated information, be sure to check our website at www.nativeunion.com >/(; @6< .,; 05 ;/0: 7(*2(., 1. MM03i Bluetooth® wireless handset 2. MM03i base 3. One Multi-country AC adaptor with wire and micro USB with 4 exchangeable adaptor plugs for Europe, 1 UK, North America, Asia and Australia. 4. Micro-USB / USB Cable 5. Instruction Manual 6.
36*(;065 6- *65;963: 3.5mm Jack Port Micro USB Port iPhone® Dock Earpiece Multi-Function Button (MFB) Volume Button MM03i Handset Base Charging Pin Microphone /V^ [V \ZL [OL 44 P! PLEASE READ THESE INSTRUCTIONS CAREFULLY before using your new handset IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards.
. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not install near any heat sources such as radiators, heat registers, stoves, or other HWWHYH[\Z PUJS\KPUN HTWSPÄLYZ [OH[ WYVK\JL OLH[ 6US` \ZL H[[HJOTLU[Z HJJLZZVYPLZ ZWLJPÄLK I` [OL THU\MHJ[\YLY Please check the “Location of controls” section to locate and identify functional buttons. *655,*;05. @6<9 44 P ;6 @6<9 P7/65,® 69 (5@ BLUETOOTH® >09,3,:: ;,*/5636.
b. Plug the AC adaptor into a power outlet. c. Finally, place the MM03i handset in the charging base to charge the battery* * The MM03i comes with a build-in rechargeable battery. It takes two or three hours to fully recharge the battery. The white LED on the base is a charging indicator. It will turn on when the handset is placed on the base for charging, and turn off when it is fully charged.
NOTE : You can also use the Micro-USB/USB cable provided to connect your MM03i base directly to the USB port of your computer to recharge the handset. +LWLUKPUN VU [OL JVTW\[LY [OL JOHYNL [PTL TH` ]HY` 7SLHZL ÄUK [OL JVTW\[LY JOHYNPUN ZLquences below : - If your computer supply enough power : the iPhone® and the MM03i will be charged simultaneously. - If your computer cannot supply enough power : the iPhone® ^PSS IL JOHYNLK ÄYZ[ HUK [OL OHUKZL[ will start charging once the iPhone® is fully recharged.
STEP 4 PAIRING THE MM03i HANDSET WITH YOUR iPHONE® (OR ANY BLUETOOTH ® WIRELESS TECHNOLOGY MOBILE PHONE.) First of all, you must make sure that your mobile phone has Bluetooth® Wireless capability. If you are not sure whether it does, please consult your mobile phone’s user manual. IMPORTANT : Please note that your MM03i must be powered off before starting the pairing process.
within 1 meter c) Place your MM03i handset within 1 meter away from your mobile phone. d) Your mobile phone should search for all Bluetooth® devices and the name “MM03i” should appear on the Bluetooth® device list. e) Select “MM03i” and enter “0000” if a password is required. Bluetooth 65 Devices MM03i The MM03i will make a sound and the blue LED will light on, indicating the pairing process is now completed and the mobile phone is connected.
ATTENTION : The Bluetooth® Wireless technology signal reception works up to a 10m range (open area). If your mobile phone moves out of range, the MM03i will be automatically disconnected. The white LED on the handset will turn off to indicate disconnection. CHARGING YOUR iPHONE® Place your iPhone® in the dedicated iPhone® dock located on the MM03i base. Your iPhone® will be charged in both power on and power off modes until it is fully charged.
<:, @6<9 44 P >0;/ @6<9 P7/65,® 69 (5@ 6;/,9 BLUETOOTH® >09,3,:: ;,*/5636.@ 46)03, 7/65, 9 MAKING A CALL To make a call with your MM03i, simply dial the number on your mobile phone keypad as you normally would. When the call connects, you will now speak and listen through the last active call device, whether it is the MM03i or your mobile phone.
INFORMATION: MM03i enables a Bluetooth® connection to stay paired even if the MM03i handset or the mobile phone is switched off and on again. Please also note that MM03i can memorize up to 4 devices. This feature allows Bluetooth® re-connection when either one of the Bluetooth device is switched off and on again. MM03i will auto-reconnect to the last connected device. If last connected device is not available, it will try to connect to the next device on the list.
REJECTING INCOMING CALLS To reject a call on your MM03i, press and hold the MFB button for 2 seconds. VOLUME CONTROL During a call, to adjust the volume on your MM03i, simply press the volume control ‘+’ button to increase the volume or ‘–’ button to decrease it. REDIAL LAST NUMBER To redial the last number called on your MM03i, double press the MFB button.
MUTE During a call, press volume control ‘+’ and ‘–’ buttons together to mute the microphone. Press again to unmute. CLEAR PAIRED DEVICE LIST To clear the list of all paired devices, you will need to perform Factory Reset. To do so, switch off the MM03i place it on the charging base, then press and hold MFB button for 5 seconds while in charging state until you hear an alert tone.
If you experience problem such as hearing the sound coming out from the computer instead of your MM03i, please check that your MM03i has been selected on the “Audio Preferences” of your computer or VOIP software. AUTOMATIC RECONNECTION The MM03i is designed to reconnect automatically to the last 2 connected devices in its memory.
PAIRING AN ADDITIONAL DEVICE You only need to pair your phone with the MM03i once. Once you have paired your phone with the MM03i they will reconnect to each other in future without you having to repeat the pairing process. If you need to pair an additional phone, simply repeat the process “PAIRING THE MM03i HANDSET WITH YOUR iPHONE® (OR ANY BLUETOOTH® WIRELESS TECHNOLOGY MOBILE PHONE).
If I have two phones paired and connected, which one will be used? When you have two phones connected to the MM03i: @V\ JHU HUZ^LY JHSSZ YLJLP]LK VU LP[OLY WOVUL ^P[O [OL 44 P 0M `V\ PUP[PH[L H JHSS [OYV\NO [OL 44 P I` \ZPUN [OL 4-) I\[[VU [V LP[OLY YLKPHS [OL SHZ[ JHSS VY use your phone’s voice dial feature), then the call will happen on whichever phone is currently designated as the primary phone. As explained below, this is determined by a combination of connection order and active calls.
Multiple Calls in a multipoint connection scenario The MM03i does not allow you to call from 2 phones simultaneously.
TROUBLESHOOTING No connection between your MM03i and your Mobile Phone? ;OL ÄYZ[ [OPUN [V KV PZ [V THRL Z\YL [OH[ `V\Y TVIPSL WOVUL HUK [OL 44 P OH]L YLJVNUPaLK LHJO other and are properly paired together. The next thing to check is if the MM03i and your mobile phone are within a 10m range maximum (open area) Your iPhone® GRHV QRW ðW LQWR WKH EXLOW LQ XQLYHUVDO GRFN " There might be some obstructions on the dock. Check whether there are any obstructions on the connector and on the dock.
SPECIFICATIONS Bluetooth Specs Radio Frequency Range Output Power Class Maximum Range (open space) V2.1 + EDR 2.4 – 2.4835GHz Class 2 10 meters :\WWVY[LK 7YVÄSLZ Type of Battery Talk Time/ Working Time Standby Time Audio Output Power Supply Operating Temperature /:7 /-7 Lithium-ion Polymer Up to 6 hours Up to 32 hours 0.25W RMS AC100V-240V, 50/60Hz, 5v/1A 0 – 45°C If you are having any problem getting your MM03i to work, please go to www.nativeunion.
Regulations According to R&TTE Declaration of Conformity Native Union declares that MM03i is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC, in conformity with the following standards: EN300 328, EN301 489-1, EN301 489-17 and EN60950-1 The declaration of conformity is available at : Design Pool Limited Nam Wo Hong Building 148 Wing Lok Street Sheung Wan, Hong Kong
FCC COMPLIANCE STATEMENT This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. *OHUNLZ VY TVKPÄJH[PVUZ UV[ L_WYLZZS` HWWYV]LK I` [OL WHY[` YLZWVUZPISL MVY JVTWSPHUJL JV\SK void the user’s authority to operate the equipment.
BLUETOOTH The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. And any use of such marks by Native Union is under licence. Bluetooth QDID: B018618 Designed in France by David Turpin www.nativeunion.com Spec. is subject to change without prior notice. © Native Union and Native Union Logo are registered trademarks of Design Pool Ltd All other trademarks and registered trademarks are the property of their respected owners. iPhone® is a Trademark of Apple Inc.
