Installation Sheet

Installation Instructions
Solace Shelf (accessory to Salace Mirror)
Tools Needed:
Cordless Drill
Philips Bit
Ruler
Level
Materials Included:
Solace Mirror Shelf
(2) Supporting Pins
(8) Screws
(8) Drywall Anchors
(1) Allen Wrench
5.
Slide pins into holes on shelf back.
Use allen wrench to adjust pin
assembly left to right, if required.
4.
Place mounting pin assembly on
wall, and align center of plate with
marked hole locations. Attach plate
to wall using drywall anchors and
screws.
3.
Measure distance from center hole
to shelf bottom and outer edges.
Mark location of holes on wall.
1
2
3
4
5
1
2
3
4
5
6
7
8
9
10
11
2.
With a pencil, lightly outline shelf
bottom and outer sides.
After installing mirror, place shelf
against mirror as high as possible
ensuring it is level.
1.
A. B.