Installation Sheet

2” JR. BASKET STRAINER, DR220

W W W .NA TIVETR A ILS. NET

Remove all excess silicone around the drain after the drain has been installed

INSTALLATION INSTRUCTIONS

1. Apply a small bead of 100%

Silicone (non-water based) to the

underside of strainer body

flange (3).

2. Place stariner body (3) into

sink.

3. Place rubber seal (4) on top

of drain cup (5).

4. Place tightening screw (2)

into center of strainer

body (3) and secure .

5. Lubricate (1) with liquid

soap. Place strainer

basket (1) into strainer

body (3).

6. Attach drainpipe (not

shown) to drain cup (5)

using nut (6).