User Manual

5.1.3 Connecting an Amplification System to Your TRAKTOR AUDIO 2
To connect your power amplifier or active speakers to the TRAKTOR AUDIO 2:
1. Switch off your amplification system.
2. Connect your amplification system to the MAIN output socket on the front panel of the
TRAKTOR AUDIO 2 using an appropriate cable.
5.1.4 Final Preparations in TRAKTOR DJ
The Internal Mixer Mode is set by default when using TRAKTOR DJ in conjunction with the
TRAKTOR AUDIO 2 audio interface. The Main Mix and Headphone Cue will be automatically
configured to output from the labeled sockets on TA2. Further configuration of TRAKTRO DJ is
not required.
If you use the optional power supply, ensure it is connected to the TRAKTOR AUDIO 2 and
to a power outlet.
To start mixing with TRAKTOR DJ and the TRAKTOR AUDIO 2 in Internal Mixer Mode:
Using TRAKTOR AUDIO 2 with Your iOS Device
Setting up Your System for Internal Mixer Mode
TRAKTOR AUDIO 2 - Manual - 36