User Manual

(4) Cue Mix Encoder: This encoder is used to control the mix heard in headphones. When mov-
ing the encoder towards the rear of the TA2, you will hear more of the headphone/cue signal in
the headphones. Moving the encoder towards the front of the unit results in hearing more of
the Main output in the headphones. When TRAKTOR or TRAKTOR DJ is used in External Mixer
Mode, the encoder will have no function.
Front Panel
The image below shows a view of the front panel of the TA2.
Front panel of the TA2.
(1) MAIN Output socket: This stereo ⅛" socket is for connecting speakers or an amplification
system when using in Internal Mixing Mode, or for connecting to a DJ mixer channel when us-
ing in External Mixer Mode. This output is always running at full volume.
(2) Headphones Output socket: This stereo ⅛" socket is for connecting a set of stereo head-
phones when using in Internal Mixing Mode, or for connecting to a DJ mixer channel when us-
ing in External Mixer Mode.
Rear Panel
The image below shows a view of the rear panel of the TA2.
Rear panel of the TA2.
TRAKTOR AUDIO 2 at a Glance
Hardware Overview
TRAKTOR AUDIO 2 - Manual - 14