User Manual
(7) The absolute position on TRAKTOR's timeline measured in Bars.Beats.Phrases.
Live Input Deck
S8's rear  panel allows  you to  connect  microphones,  turntables,  or CD  players. You  can route
these audio signals into the TRAKTOR software and mix them with your other Decks by setting
a  Deck  to  Live  Input  mode  in  the  TRAKTOR  software.  In  this  mode, S8's  display  reads  Live
Input - Traktor Audio Passthru.
S8's Transport Controls are disabled while a Deck runs as Live Input.
Thru Mode
If you don't need to run an external device like turntable or CD player through a Deck, switch
that mixer channel to Thru mode on S8 by pressing the TRAKTOR button. The signal is mixed
in S8's mixer and never sent to TRAKTOR then.
4.7.4.6 View Button
The View button switches between view types in the display.
View Button
It switches between view types:
▪ Single View: Only the focused Deck is displayed.
▪ Split View: Both Decks are displayed; the focused Deck is visualized by a big waveform and
detailed information,  while  the  unfocused Deck  is  reduced  to a  small  waveform,  showing
markers and a playhead.
Whenever you open a pop-up from a Deck view (e.g. FX Selection Menu, Browser, BPM,
or KEY) the View button starts flashing. Press the View button to close the pop-up.
Hardware Reference
The Deck
TRAKTOR KONTROL S8 - Manual - 253










