User Manual

Latching Sample Slots for Gated Samples
You can use the Mute (STOP) button to temporarily latch the playback of a gated Sample (see
also ↑4.7, Type Mode). Here's how:
1. While holding the pad of a gated Sample, press the Mute (STOP) button.
2. Now release both buttons and the Sample will continue to play.
This is only a temporary override of the normal, programmed behavior for the Sample Cell.
Subsequently pressing the pad will result in the normal gated behavior of the Sample.
When you perform this type of latch, the Mute state of the Sample Slot will not be
changed. In other words, the Sample Slot's Mute function will stop working if you are
holding the pad of a gated Sample while pressing Mute (STOP), even if the Sample has
already been latched by a previous press of Mute (STOP).
4.3 Browse Mode
Using the TRAKTOR KONTROL F1's Browse mode gives you a great deal of control over TRAK-
TOR's Browser so that you can locate and load Samples and saved Remix Sets from the Collec-
tion.
As with most of the F1's various modes, you can use the Browse mode either in temporary or in
latched mode. The temporary behavior is great for being able to quickly load a Sample or Re-
mix Set from the current location in the Browser Tree. The latched behavior gives you full ac-
cess to the Browser and the Browser Tree.
Several performance-critical controls are not affected when Browse mode is activated:
▪ Filter knobs
▪ Volume faders
▪ Mute (STOP) buttons
Other controls are disabled in Browse mode. You can readily see this because their LEDs are
turned off completely when Browse mode is active:
▪ SYNC (MASTER)
TRAKTOR KONTROL F1 Reference
Browse Mode
TRAKTOR KONTROL F1 - Manual - 86