User Manual

1. Press and hold SHIFT while pulling the Volume fader for Sample Slot 3 down a bit. Re-
member: you won't hear any changes because the gain of the Sample is being increased
by the same amount that the Sample Slot volume is decreased.
2. When the Sample is loud enough, release SHIFT and move the Volume fader back up to
increase the output level of the Sample Slot.
The important thing here is to realize that when moving the Volume faders with SHIFT pressed,
you are moving the Sample Cell volume in the opposite direction of the actual gain of the Sam-
ple. You don't hear any difference in volume while moving the Volume faders while pushing
SHIFT because the gain of the Sample Cell is compensated by the change in the actual Sam-
ple gain!
It is a good idea to load a Remix Set and practice changing Sample Gain in various
Sample Cells to get the feel for this! Once you feel comfortable doing this, you'll find
that it's a quick an easy way to balance the Samples playing in your Remix Decks.
4.2.3 SYNC (MASTER) Button
This button sets the SYNC and MASTER states for the Remix Deck you are controlling with the
F1. The Sync function syncs the Remix Deck to the TRAKTOR Deck currently set to Master.
The Master function sets the Remix Deck itself to operate as Master.
In this manual, we will only cover the Sync and Master states in as far they are relevant for
operating the Remix Decks with your F1. For more in-depth information on Sync and Master
states, please refer to the TRAKTOR 2 Manual.
The SYNC (MASTER) button on the F1.
Sync
By pressing the SYNC (MASTER) button without pressing SHIFT you will toggle the Sync state
of the Deck. The SYNC (MASTER) button reflects (and controls) the state of the SYNC button
on the TRAKTOR software.
TRAKTOR KONTROL F1 Reference
Performance Mode
TRAKTOR KONTROL F1 - Manual - 69