User Manual

The F1's Filter knobs are always active and work independently of the mode the F1 hap-
pens to be in.
►
Rotate the Filter knobs to the left (counterclockwise) for low-pass filtering and to the
right for high-pass filtering.
Notice that the Filter controls on the software move as you move the F1's Filter knobs. If
the Filter controls on the software user interface have been moved so that they don't
match the position of the F1's Filter knobs, when you move the knobs on the F1, the
controls on the software will snap to the hardware controls' positions.
4.2.2 Volume Faders
Under the four Filter knobs are the four Volume faders, corresponding to the four Sample Slots
of the Remix Deck currently being controlled (in focus) by the F1.
The F1's Volume faders.
Like the Filter knobs, the Volume faders work independently of the other Remix Deck modes. If
you are playing with the Reverse mode, for example, you still have full control of both Sample
Slot volume and filtering through the Filter knobs and Volume faders.
►
Pull the Volume faders up to increase Sample Slot volume and down to decrease it.
TRAKTOR KONTROL F1 Reference
Performance Mode
TRAKTOR KONTROL F1 - Manual - 67