User Manual
Table Of Contents
- Title Page
- Disclaimer
- Contact
- Table of Contents
- Welcome to the World of TRAKTOR KONTROL S8!
- Using Your S8—Getting Started
- Using Your S8—Getting Advanced
- Hardware Reference
- Common Setups
- Preferences Pane in TRAKTOR
- The S8 Audio Interface and Control Panel
- Troubleshooting - Getting Help
- Technical Specification
In Direct Thru mode, the microphone signal is not sent to the computer. Instead, it is mixed
directly in S8's mixer, solving any latency issues you might have at the expense of not being
able to add FX.
In Direct Thru mode, TRAKTOR's FX Units don't have any effect on the signal, but the 3-
band EQ and the Filter are still available.
5.6.4 Activating a MIC Input
Before activating the microphone for the first time, please lower the channel fader to pre-
vent sudden bursts of noise from your speakers or headphones when activating the MIC In-
put.
►
Activate the microphone by pressing the MIC 1 button.
→
The microphone is ready for use.
Deactivating a Microphone
With MIC 1 input active:
►
Deactivate the microphone by pressing the MIC 1 button again.
Common Setups
Connecting Microphones
TRAKTOR KONTROL S8 - Manual - 240