User Manual

►
Press a MIC (1 or 2) button to activate the connected microphone. The MIC button and
the assigned channel's TRAKTOR button light up bright green when enabled.
►
If the microphone can't be assigned to the channel you select, the TRAKTOR and MIC
buttons flash alternately.
Changing the channel assignment
1. Check the assignment by holding the MIC 1/2 button. The assigned channel's TRAKTOR
button lights up bright green. All channels you can assign the MIC to are marked dim
green.
2. Hold the MIC 1 button.
3. Press another channel's TRAKTOR button to assign the microphone to it.
→
If the assignment is successful, the newly assigned channel's TRAKTOR button lights
bright green.
For more information on connecting a microphone and setting up your S8 accordingly, refer
to section ↑5.6, Connecting Microphones.
4.4.2.8 MAIN Knob
The MAIN knob controls the overall output level of your mix going to S8's MAIN OUTs.
MAIN Knob
The LED meters to the left and right show the output level. If the MAIN knob is turned left
(towards its minimum value), the associated main level meters will go down, too.
Adjust the MAIN knob so that the loudest passages of your performance stay in the upper
part of the blue area without exceeding the orange LEDs
Hardware Reference
The Mixer
TRAKTOR KONTROL S8 - Manual - 217