User Manual
Table Of Contents
- Title Page
- Disclaimer
- Contact
- Table of Contents
- Welcome to the World of TRAKTOR KONTROL S8!
- Using Your S8—Getting Started
- Using Your S8—Getting Advanced
- Hardware Reference
- Common Setups
- Preferences Pane in TRAKTOR
- The S8 Audio Interface and Control Panel
- Troubleshooting - Getting Help
- Technical Specification
2. Turn the BROWSE knob to adjust MASTER tempo in .01 BPM increments. To adjust in full
BPM steps, hold SHIFT while turning the knob.
→
The Track/Remix content playback speed is adjusted.
If you need to manually sync a Deck to an external source like a turntable, use the tempo ad-
justment in combination with the Deck's touch strip as described in section ↑3.1, Using Touch
Strip.
Note that for Decks which are either set as the MASTER Deck or are synced to MASTER, S8
displays MASTER CLOCK BPM. If the Deck in focus is not in sync with TRAKTOR's Master
Clock, the BPM overlay shows the Track Deck's or Remix Deck's individual BPM.
The BPM overlay can only be accessed on Track- or Remix Decks.
4.4.2.5 BOOTH Knob
The BOOTH knob allows you to send the MAIN signal to a second set of loudspeakers via the
BOOTH OUT connectors and control their volume independently of the volume set by the VOL-
UME knob. One common use is to have your own monitor speakers on stage, so you can control
their volume independently from the venue's P.A. system.
BOOTH Knob
The BOOTH knob works the same regardless of whether the mixer is being used in TRAK-
TOR mode, with a mixed setup, or as a stand-alone mixer.
4.4.2.6 GLOBAL Section
Snap and Quantize modes can be enabled/disabled directly from the S8 by pressing the corre-
sponding buttons S and Q buttons in the GLOBAL section.
Hardware Reference
The Mixer
TRAKTOR KONTROL S8 - Manual - 215