User Manual
Table Of Contents
- Title Page
- Disclaimer
- Contact
- Table of Contents
- Welcome to the World of TRAKTOR KONTROL S8!
- Using Your S8—Getting Started
- Using Your S8—Getting Advanced
- Hardware Reference
- Common Setups
- Preferences Pane in TRAKTOR
- The S8 Audio Interface and Control Panel
- Troubleshooting - Getting Help
- Technical Specification
S8's internal EQ sounds identical to the Z ISO which is the default in the TRAKTOR soft-
ware.
TRAKTOR PROvides you with various types of EQ, each of them with its own “personality.”
You can choose the EQ type in Preferences > Mixer > EQ Selection.
4.4.1.5 Channel Fader
The channel fader controls the channel’s level being sent to the Crossfader and MAIN OUT.
Channel Fader
Use the fader to smoothly fade a channel into your mix.
A channel's fader setting doesn't affect its volume in the CUE - use the GAIN knob to bal-
ance its relative level and then pull the faders up to fade in.
4.4.1.6 Channel Meter
Use the channel meter's visual feedback to set up the optimal signal level. If your source is a
TRAKTOR Deck, simply adjust the GAIN knob.
If you connect external turntables or CD Players, use their volume knobs to set the correct
channel level. If S8's input starts clipping, lowering GAIN will make the channel quieter,
but it won't resolve clipping at the input.
Hardware Reference
The Mixer
TRAKTOR KONTROL S8 - Manual - 208