User Guide

4.1 Important Hardware Installation Information
Before connecting the device to your computer, here are some important points to be aware of:
The TRAKTOR KONTROL S8—in combination with a power amplifier, speakers, or
headphones—can produce sounds in decibel ranges that may cause hearing damage. Al-
so, switching off the device with the volume control set to a high level may damage your
loudspeakers. Always make sure the volume faders on the S8 are set to minimum before
connecting the power supply, connecting external equipment, playing music, or switch-
ing the device on or off. Once everything is connected and set up, gradually raise the
volume while music is playing until you reach the desired listening level.
Do not use the TRAKTOR KONTROL S8 with a power supply other than the one includ-
ed in delivery. In case of loss or damage, make sure to purchase a replacement power
supply approved by Native Instruments for use with the S8.
Before you use the power supply, please refer to the TRAKTOR KONTROL S8 IMPOR-
TANT SAFETY INSTRUCTIONS leaflet (included in the box). This leaflet explains how to
attach the adaptor plug specific to your region.
When using the TRAKTOR software on a Windows system, make sure that you have instal-
led the TRAKTOR KONTROL S8 hardware driver with the TRAKTOR software installer be-
fore you connect the device to your computer. For this, please follow the instructions spe-
cific to your operating system in section 2, Software Installation.
Due to high amounts of data transmitted to the TRAKTOR KONTROL S8, it may not work
properly when connected to a USB hub. Ensure that it is directly connected to a USB port
on your computer.
Hardware Installation
Important Hardware Installation Information
TRAKTOR KNOTRL S8 - Setup Guide - 37