User Manual

2.3.9 Using Two or More Hardware Controllers
If two or more MASCHINE controllers of different types (MASCHINE STUDIO, MA-
SCHINE MK3, MASCHINE MK2, MASCHINE MIKRO MK2, MASCHINE, MASCHINE MIKRO,
and MASCHINE JAM) are connected to your computer, only one controller can be used to con-
trol the MASCHINE software at a time.
If you have more than one instance of the MASCHINE software running on your comput-
er, you can control each instance with a different controller. See ↑2.5.3, Controlling Var-
ious Instances with Different Controllers for more information.
A controller not connected to any MASCHINE software instance can be used in MIDI
mode (i.e. as a MIDI controller) at the same time as the other controller(s). See the Con-
troller Editor Manual for more information on MIDI mode.
You can choose which controller you want to use with the MASCHINE software. This can be
done both from your controller and in the software.
You can select the desired controller from the Controller menu in the Application Menu Bar or
from the Controller submenu in the MASCHINE menu:
Basic Concepts
Common Operations
MASCHINE - Manual - 55