User Manual

►
To pin a mode on your controller, press the relevant mode button (SCENE, PATTERN,
etc.) + Button 1 above the left display.
→
Now the mode is always pinned when you select it.
►
To unpin a mode (i.e. make it a temporary mode again), press its mode button + Button
1 again.
→
Now the mode will only be active as long as you hold the mode button.
Here is a list of all buttons on your controller that you can pin by pressing Button 1 simultane-
ously:
▪ All buttons in the column at the left of the pads (SCENE, PATTERN, …, SOLO, MUTE)
▪ GRID button
▪ NOTE REPEAT (Arp) button
▪ FILE button
▪ SETTINGS button
▪ AUTO button: Instead of using Button 1, press SHIFT + AUTO to pin the AUTO mode.
Moreover, when you leave this mode it is automatically unpinned — it will be temporary
again next time you press AUTO.
▪ MACRO button: Instead of using Button 1, press SHIFT + MACRO (Set) to pin Set Macro
mode.
2.3.3 Undo/Redo
Undoing and re-doing your last actions can be useful to cancel operations you have performed
or to compare two versions before and after a change. You can undo nearly everything you did
after loading or creating your Project.
Note: If you save your Project, you will no longer be able to undo or redo any actions
performed before saving!
MASCHINE provides two different undo/redo features, each of them being suited for specific
situations:
Basic Concepts
Common Operations
MASCHINE - Manual - 37