User Manual

5. Then select MIDI Note to trigger your Lock snapshots via MIDI notes, or Program Change
to trigger your Lock snapshots via MIDI Program Change messages.
6. If necessary, reopen the same submenu and select the MIDI channel the Lock changes
should receive MIDI messages from (channel 1 by default).
MIDI Scene change has priority over Lock change. If you select the same MIDI Source
and Channel for Lock and Scene changes, only Scenes will be triggered by the corre-
sponding events coming from the MIDI source. Corresponding Lock snapshots will not
be recalled.
For more information on triggering Lock snapshots using your DAW (Digital Audio Workstation),
please check the Knowledge Base on the Native Instruments website.
5.7 Using the Smart Strip
The Smart Strip on the controller puts control of several parameters literally at your fingertips:
You can use the Smart Strip to apply pitch bend or modulation to the sound you are playing on
the pads, or you can tweak Perform FX in real time. You can also play Sounds by strumming on
the Smart Strip.
Smart Strip on the Controller with PITCH mode enabled.
Playing on the Controller
Using the Smart Strip
MASCHINE - Manual - 269