User Manual

3. Select the pad containing the snapshot you want to update. If necessary, press Button 7
or 8 to access a Lock snapshot from another bank.
⇨ The selected snapshot will illuminate to indicate it is in focus.
4. Press the LOCK button to exit Extended Lock view.
5. Adjust the settings on your controller until you are ready to update the snapshot. You can
use button 5 and 6 to switch between Channel parameters and Plug-in parameters.
6. Press SHIFT + LOCK (Ext Lock) to return to Extended Lock view.
7. Press button 5 UPDATE to update your snapshot.
⇨ The selected snapshot is updated.
Repeat the process to update other Lock snapshots.
5.6.4 Recalling a Lock Snapshot
Within Extended Lock you can recall a stored Lock snapshot.
To recall a Lock snapshot:
1. Press the CHANNEL or PLUG-IN button.
2. Press SHIFT + LOCK (Ext Lock)
3. Select the snapshot you want to recall from the pads. If necessary, press Button 7 or 8 to
access a Lock snapshot from another bank.
The snapshot is recalled and parameters return to their stored setting. You can also morph be-
tween settings using the settings in the on-screen overlay.
5.6.5 Morphing Between Lock Snapshots
When switching between two stored snapshots you can set MASCHINE to morph between
them, adding movement and interest to a song. Within Extended Lock you can switch on
morphing, and set the morph sync and timing parameters.
To morph between your Lock snapshots:
1. Press the CHANNEL or PLUG-IN button.
2. Press SHIFT + LOCK (Ext Lock).
Playing on the Controller
Using Lock Snapshots
MASCHINE - Manual - 265