User Manual

Volume and Velocity Shortcuts
The VOLUME button.
In Pad Mode, Keyboard mode or Chords mode:
1. Press the VOLUME [Velocity] button.
2. To change the output level of the Master (i.e. the overall output level of MASCHINE), sim-
ply turn the 4-D encoder.
3. To change the output level of a Group, hold its Group button (first navigate to its Group
bank if necessary) and turn the 4-D encoder.
4. To change the output level of an individual Sound, hold its pad and turn the 4-D encoder.
In Step mode:
1. To change the velocity of a selected step in Step mode, hold its pad and turn the 4-D en-
coder.
→
The adjusted value is temporarily shown on the left display.
To adjust the value in finer increments, press and turn the 4-D encoder (or hold SHIFT
while you turn it).
These shortcuts control the LEVEL parameter in the AUDIO page of the Master’s,
Group’s, and Sound’s Output properties, respectively. See section ↑8.1.2, Configuring
the Main Output of Sounds and Groups and ↑8.1.4, Configuring the Master and Cue
Outputs of MASCHINE for a detailed description of these properties.
Playing on the Controller
Playing Tools
MASCHINE - Manual - 245