User Manual

When Prehear is enabled, you can directly hear Samples as you select them in the Result list
of the LIBRARY pane or FILES pane.
►
Drag the Prehear Volume slider next to the Prehear button to adjust the volume of the
Samples you are pre-listening to.
The Prehear signal is sent to the Cue bus of MASCHINE. This allows you to pre-listen to Sam-
ples on a distinct output pair (e.g., in your headphones) without affecting MASCHINE’s main
output! For more information on the Cue bus, see section ↑9.2.6, Using the Cue Bus.
Prehear and Autoload are mutually exclusive: Only one of them can be active at a time.
For more information on the Autoload feature, see section ↑3.3.1, Loading the Selected
Files Automatically.
Auditioning Samples using the Controller
When browsing Samples on your controller:
►
Press SHIFT + Button 8 (PREHEAR) to enable/disable the Prehear function.
When Prehear is enabled:
▪ The Sample selected in the result list can be triggered from the pad of the focused Sound
or from any pad without being loaded into that Sound.
▪ Pressing any other pad triggers its Sound without changing the focus. To set the focus to
another Sound you have to press SELECT + its pad or to disable Prehear.
▪ Turn the 4-D encoder or Knob 8 to select the previous or next Sample in the result list.
Upon selection this Sample is played back and the previous Sample stops playing.
▪ Button 5 (PREV) and 6 (NEXT) do not automatically load the Sample they select as they
usually do (see section ↑3.3.1, Loading the Selected Files Automatically), but instead they
play it back as well.
▪ To load the Sample, press the 4-D encoder or Button 8 (LOAD).
When you disable Prehear, the playback of any Sample still being pre-listened is stopped.
The Prehear signal is sent to the Cue bus of MASCHINE. For more information on the
Cue bus, see section ↑9.2.6, Using the Cue Bus.
Browser
Additional Browsing Tools
MASCHINE - Manual - 141