Installation Manual

6. Click the Kick entry to load it into the Plug-in List.
→
The Kick Plug-in is now loaded and is ready to be tweaked.
4.2.2.2 Loading a Drumsynth into a Plug-in List on the Controller
1. Press the PLUG-IN button in the top left corner of your controller to enter Control mode
and display the Plug-in slots.
2. Press SELECT + pad 5 to select the Sound Kick Ektl A 2.
3. Press Button 3 to select the SOUND tab.
The left display shows you all the Plug-ins loaded in the selected Sound — in our case
there is only one: the Sampler.
4. Move the 4-D encoder to the left so that the white frame moves onto the Sampler in the
left display. This white frame indicates the focus – now the focus is on the Sampler:
Building Your Own Drum Kit
Customizing Your Drum Kit
MASCHINE - Getting Started - 58