Installation Manual

The MIDI sockets on the rear panel of the MASCHINE controller.
To connect your external MIDI equipment:
1. Connect the device receiving MIDI signals to the MIDI OUT socket on the rear panel of
the MASCHINE controller using a 5-pin DIN MIDI jack.
2. Connect the device sending MIDI signals to the MIDI IN socket on the rear panel of the
MASCHINE controller using a 5-pin DIN MIDI jack.
→ The MIDI equipment is connected.
Depending on your use case, additional configuration is required in the software:
▪ If MASCHINE is running as a stand-alone application, you need to activate the correspond-
ing MIDI inputs and outputs of your MASCHINE controller on the MIDI page of the Prefer-
ences.
▪ If MASCHINE is running as a plug-in in a host, the MIDI configuration is managed by the
host.
Setting Up MASCHINE
Setup Examples
MASCHINE - Getting Started - 31