Installation Manual

2. Plug the 1/4" TRS jack of your headphones into the PHONES socket nearby.
3. Start the playback of a Project in MASCHINE or an audio file on your computer.
4. Gradually turn the PHONES VOLUME knob on the MASCHINE controller until you reach a
comfortable listening level.
The headphones output of your MASCHINE controller is an additional stereo output, distinct from
the main output pair, and perfectly tailored for the Cue channel of MASCHINE. However, if you
want to monitor the main outputs in your headphones, please check the Route Main to Headphones
box in the Audio Outputs section of the Hardware page in the Preferences. For more information,
please refer to the Manual.
2.3.3 MASCHINE in a Recording Setup
The following instructions will assist you in using the MASCHINE controller in a recording sit-
uation for capturing audio to MASCHINE — for example, for recording samples or process a
live input during a performance.
You will find two examples using a recording setup with step-by-step instructions on how to route
external audio to a particular Sound of your MASCHINE Project in section Using an External Sound
Source and How to Sample.
Setting Up MASCHINE
Setup Examples
MASCHINE - Getting Started - 26