Installation Manual

1 2

3 4

5 6

8 9

10 11

The Control section on your controller.

(1) CHANNEL button: Press CHANNEL to switch to Control mode (the default mode on your

controller) and directly display the Channel properties of the selected Sound/Group or the Mas-

ter. This provides instant access to all Channel properties’ parameters via the eight Buttons

and eight Knobs above and under the displays.

For a quick introduction to Channel properties, see Changing the Sound, Group, and Master Chan-

nel Properties.

Press SHIFT + CHANNEL (MIDI) to switch your controller to MIDI mode. This mode will enable

you to use MASCHINE as a MIDI controller (for more information on this, please refer to the

Controller Editor Manual).

(2) PLUG-IN button: Press PLUG-IN to switch to Control mode (the default mode on your con-

troller) and directly display the Plug-in(s) loaded in the selected Sound/Group or the Master.

This provides instant access to all Plug-ins’ parameters via the eight Buttons and eight Knobs

above and under the displays. See ↑7.2, Playing with Effects for a practical example. Press

SHIFT + PLUG-IN (Instance) to enter Instance mode. In this mode you can select which in-

stance of the MASCHINE plug-in you want to control from your hardware controller if you have

more than one instance open in your host.

Quick Reference

MASCHINE Hardware Overview

MASCHINE - Getting Started - 164