Installation Manual

→ The next time you select a new Scene/Section or loop range, the switch will happen on
the next quarter note.
Adjusting the Scene Retrigger Setting
To adjust the Scene Retrigger setting:
1. Press and hold SCENE to enter Section mode (or pin it by pressing SCENE + Button 1).
2. At the bottom left corner of the left display you see the current RETRIGGER value (Off by
default).
3. Turn Knob 1 to select On.
→ The next time you select a new Scene or loop range, it will start from the beginning.
Adjusting the Section Retrigger Setting
To adjust the Section Retrigger setting:
1. Press and hold SHIFT + SCENE to enter Section mode (or pin it by pressing SCENE +
Button 1).
2. Press the Right Page button to access page 2.
3. At the bottom left corner of the left display you see the current RETRIGGER value (Off by
default).
4. Turn Knob 1 to select On.
→ The next time you select a new Section or loop range, it will start from the beginning.
Playing Live
Performing with Scenes and Sections using the Pads
MASCHINE - Getting Started - 150