Installation Manual

◦ If Retrigger is disabled (default setting), the next Scene or Section that is selected
will play from the same offset to the beginning: for example, leaving the current Sec-
tion on beat 3 will cause the new Section to start playing on its beat 3. This ensures
that the global groove of your track is not interrupted.
11.1.1 Jumping between Scene or Sections in the Software
In the software, the Perform Grid and the Retrigger setting can be adjusted in the MASCHINE
Header.
In Ideas view the Perform Grid and the Retrigger controls the setting for jump between Scenes
and in Song view it sets the grid for the jump between Sections.
To set the Perform Grid and the Retrigger settings:
1. Click the Arranger View button to access Ideas view for Scenes or Song view for Sections.
⇨ When the Arranger View button is illuminated, Song view is active.
2. To adjust the Perform Grid, click the Performance Grid menu in the Header and select the
desired division from the menu:
Playing Live
Performing with Scenes and Sections using the Pads
MASCHINE - Getting Started - 148