Installation Manual

2. Press and hold SCENE (Section) to enter Scene mode (or pin it by pressing SCENE (Sec-
tion) + Button 1).
The right display shows the names of your Scene slots. Additionally, the selected Scene
slot is highlighted.
3. Press for example pad 2 to select Scene slot 2.
4. Press Button 4 (DUPLICATE) to duplicate this Scene slot.
⇨ A new Scene slot is inserted right after Scene slot with the same properties and content.
The existing Scene slots are shifted one slot to the right to make way for the new entry.
Note that the duplicate slot is automatically selected.
5. Press Button 6 (DELETE) to remove this new Scene.
The Scene is removed. Scenes to the right of the removed Scene are shifted one slot to the left
to fill the gap.
9.4 To Sum Up…
In this tutorial, we have learned to:
▪ Create a Scene using our Patterns.
▪ Select a Scene for playing.
▪ Pin the various controller modes.
▪ Rename, color, duplicate, and delete Scenes slots.
Once you feel comfortable with these few tasks, proceed with the next chapter, where you can
quickly assign your Scenes to Sections to create an arrangement.
9.5 Saving Your Project
Again, it is recommended to regularly save your work. You can then open another Project or
close MASCHINE and take a break. Your tutorial Project will be recalled as it was the next time
you open it.
To save your Project in the software:
Creating Scenes
To Sum Up…
MASCHINE - Getting Started - 133