Installation Manual

If you wish to load a Plug-in at the Group level, just follow the same procedure except at the second

step click the GROUP tab instead of the SOUND tab! Similarly, if you wish to load a Plug-in at the

Master level (to process the audio of the whole Project), click the MASTER tab at this step.

7.1.2 Loading an Effect on the Controller

1. Press the PLUG-IN button to enter Control mode and display the Plug-in slots.

2. Press button B to select the Group “Bass” containing the bass lines.

3. Press SELECT + pad 1 to select the Sound “Analovue.”

4. Press Button 3 to select the SOUND tab.

You see the Massive Plug-in in the left display, surrounded by a white frame indicating

that the Plug-in is under focus:

Move the 4-D encoder to the right (or press Button 6) to put the focus onto the “+” sym-

bol.

This selects the next free Plug-in slot.

6. Press the 4-D encoder to open the Plug-in menu. You can also press SHIFT + BROWSER

to do this.

Applying Effects

Loading Effects

MASCHINE - Getting Started - 106