User Manual

1. Press and hold NOTE REPEAT, then hold any pad.
The Sound of the pad is repeatedly triggered at the rate shown at the bottom of the con-
troller’s display.
2. Turn the Encoder to select another repetition rate.
→ This is a handy way to add live ornaments to your Pattern.
You can also use Note Repeat to program your Pattern (e.g., record a continuous hi-hat).
Note Repeat mode seamlessly switches to Arp mode as soon as you switch your pads from Pad
Mode to Keyboard mode (see below): All current values (including the LOCK state) are retained.
Using Arp in Keyboard mode and Chords mode
If your pads are in Keyboard mode or Chords mode, pressing NOTE REPEAT (Arp) switches
your controller to Arp mode:
In Pad Mode, Keyboard mode and Chords mode you can customize the way the notes of the
played chord will be arpeggiated by adjusting following settings.
► Press the Arrow buttons to access following settings, and turn the Encoder to adjust val-
ues.
Playing on the Controller
Performance Features
MASCHINE MIKRO - Manual - 259