User Manual

→ MASCHINE will send a MIDI Clock signal to any connected device that is capable of re-
ceiving MIDI Clock.
You can adjust the MIDI Clock offset in the MIDI page of the Preferences panel. See ↑3.6.3, Prefer-
ences – MIDI Page for more information.
If you want MASCHINE to send other MIDI messages than MIDI Clock, in particular if you want to
control other MIDI-capable devices via the notes played in MASCHINE, please refer to section
↑12.2.5, Sending MIDI from Sounds.
3.7.4 Using MIDI Mode
Your controller provides a fixed MIDI Mode implementation which allows you to directly control
other MIDI devices using a fixed implementation of MIDI Control Change messages.
To access MIDI Mode on your controller:
► Press SHIFT + Project button (top left hand side).
→ The controller enters MIDI Mode.
In MIDI mode the controls on your device are mapped as depicted in the following image:
Basic Concepts
Integrating MASCHINE into a MIDI Setup
MASCHINE MIKRO - Manual - 120