User Manual

Table Of Contents
3. Press the power switch on the rear panel of the keyboard to switch it on.
The keyboard is now detected by the operating system.
Non-powered USB hubs are not supported. The keyboard should always be connec-
ted directly to the USB port of the computer, or be used with a powered USB hub.
4.2. Setting up the Stand-Alone Application
When you launch the KOMPLETE KONTROL software from its installation directory, it starts as a
stand-alone application independently from a host.
By default, the application uses the standard audio interface of your computer. In order to use an-
other audio interface, and receive MIDI notes from the keyboard, you need to configure the appli-
cation in the Preferences.
Configuring Audio Interface
1. In the KOMPLETE KONTROL menu click on Edit > Preferences to open the Preferences.
2. Click on Audio to display the Audio page.
3. Select the hardware driver supported by your audio interface from the Driver drop-down
menu.
4. Select the audio interface from the Device drop-down menu.
5. Under Routings, select the left and right output channels of your audio interface you want to
use for KOMPLETE KONTROL’s master output in the Komplete Kontrol Out 1 L and Kom-
plete Kontrol Out 1 R drop-down menus.
Setting up KOMPLETE KONTROL
13