User Manual
Table Of Contents
- 1 Introduction
- 2 Basic Concepts
- 3 Browser
- 4 Creating Sounds
- 5 Creating Groups
- 6 Working with Patterns (Hardware)
- 7 Working with Patterns (Software)
- 7.1 The Pattern Editor
- 7.2 Editing Patterns
- 7.2.1 Mouse actions in the Pattern Editor
- 7.2.2 The Zoom Tool
- 7.2.3 Compare/Split
- 7.2.4 The Piano Roll/Keyboard
- 7.2.5 Recording and editing automation
- 7.2.6 Adding a Modulator
- 7.2.7 Step Grid, Pattern Length Grid and Quantization
- 7.2.8 Rendering Audio from Patterns using Drag & Drop
- 7.2.9 Rendering MIDI from Patterns using Drag & Drop
- 8 The MASCHINE Effects (FX)
- 9 Using FX
- 10 Creating a Song using Scenes
- 11 Sampling & Sample Mapping
- 12 The Master Section
- 13 Exporting Audio
- 14 Appendix A: MASCHINE Controller Quick Reference Chart
- 14.1 Basic Sequencer Controls
- 14.2 Loading and Saving
- 14.3 Scene Operations
- 14.4 Pattern Operations
- 14.5 Basic Editing
- 14.6 Group Operations
- 14.7 Sound Operations
- 14.8 Effects
- 14.9 Muting
- 14.10 Soloing
- 14.11 Automation
- 14.12 Basic Sampling
- 14.13 Secondary Pad Functions
- 14.14 Navigation Shortcuts on the MASCHINE Controller
- 14.15 Other Shortcuts on the MASCHINE Controller
- 15 Appendix B: Keyboard Shortcuts
- 16 Appendix C: Tips for playing live
- 17 Index
MASCHINE 1.5 Reference Manual – 192
BPM
Shows the BPM based on the Tempo settings above; if
Manual is selected, you can dial in a BPM value using
Knob 4; if Auto is selected, you can choose from multiples
of the Tempo calculated by MASCHINE.
Detect Mode
In Detect Mode, the Sample will be sliced according to its
transients.
SEnS
Sensitivity parameter for the transient recognition (Knob
2). Higher values will cause more Slices to be detected
because more transients will be recognized, lower values
will result in less slices. This parameter should be adjusted
until all the musically signicant slices are being detected
in the Right Display.
tEmpo
Determines the tempo of the Sample: available options are
Auto and Manual.
BPM
Shows the BPM based on the Tempo settings above; if
Manual is selected, you can dial in a BPM value using
Knob 4; if Auto is selected, you can choose from multiples
of the Tempo calculated by MASCHINE.
EdIt
You can edit separate Slices using the Edit Mode. Press
Button 5 to enter Edit Mode (see picture of Edit mode be-
low).
The Edit Mode in the Slice Tab