User Manual

Table Of Contents
MASCHINE 1.5 Reference Manual – 171
Selecting Aux 1 on the hardware
As you can hear, the Sound is already being sent to the Effect; by turning the Aux 1
Level, you can adjust the amount of signal that gets sent into the Effect.
Software
1. Select the rst Sound Slot of an empty Group; now load an Effect into the Sound Slot’s
FX Tab by selecting it in the dropdown menu:
Loading the Filter
2. On the Source Tab (SRC), select Input and leave the Source set to Internal:
The SRC Input Tab
!
The Sound is automatically renamed to “Input 1(if you chose the Sound 1). But you
can rename the Sound further to be able to clearly identify it as an Effect later! This
will help you choose the right Sound from the Aux destination list.