User Manual

2. On the S5 Hold the AUX button.
→
The audio of the external audio device is now into the main mix.
The audio is integrated in the main mix as long you keep the AUX button hold.
Adjusting Volume of Line Level Audio Device
While holding the AUX button the LED rows on the Touch Strips change the illumination and
the LEDs next to the LOOP encoders flash. The LOOP encoders now function as Volume knobs
and the LEDs of the Touch Strips indicate the current volumes.
In order to adjust the volume of line level audio device:
►
Rotate the LOOP encoder on the left Deck.
→
The line level audio device’s volume changes and the illumination of the Touch Strip’s
LEDs indicate the current volume level.
Volume adjustments for the microphone and the external audio devices will not retain
when the AUX button is released. The volume level of the microphone will reset to 50 %
whereas the volume level for the external audio device will reset to maximum.
Adding External Audio Devices
Adding a Line Level Audio Device
TRAKTOR KONTROL S5 - Manual - 189