User Manual

▪ Single Mode: select one effect; the FX knobs let you control up to 4 parameters.
▪ Group Mode: select up to three effects as an effects chain; the FX knobs let you control
one parameter per effect.
The following table gives a detailed overview of the parameters controlled by FX buttons and
FX knobs and it provides links referring to sections with further information.
Name Function in Single Mode Function in Group Mode
FX Button 1 Activate/deactivate the entire FX
Unit.
-
FX Button 2 Reset all FX parameters to their
default value.
Activate/deactivate FX slot 1.
FX Button 3 Depends on the selected effect. Activate/deactivate FX slot 2.
FX Button 4 Depends on the selected effect. Activate/deactivate FX slot 3.
FX Knob 1 Adjust the ratio between the
unprocessed (dry) signal and
processed (wet) signal for the
entire FX Unit.
Adjust the ratio between the
unprocessed (dry) signal and
processed (wet) signal for the
entire FX Unit.
FX Knob 2 Controls FX parameter 1. Control the 1st effect in the FX
Unit.
FX Knob 3 Controls FX parameter 2. Control the 2nd effect in the FX
Unit.
FX Knob 4 Controls FX parameter 3. Control the 3rd effect in the FX
Unit.
4.3.1 FX Unit Assignment
In order to route a Deck's signal to an FX Unit, press the corresponding FX Assign button in the
mixer channel.
Hardware Reference
The FX Unit
TRAKTOR KONTROL S5 - Manual - 164