User Manual
Table Of Contents
- Title Page
- Disclaimer
- Contact
- Table of Contents
- Welcome to the World of TRAKTOR KONTROL S5!
- Using Your S5—Getting Started
- Using Your S5—Getting Advanced
- Hardware Reference
- Adding External Audio Devices
- Preferences Pane in TRAKTOR
- The S5 Audio Interface and Control Panel
- Troubleshooting - Getting Help
- Technical Specification
1. Press the SHIFT button and the Display Button 1. The Beatgrid mode opens in the dis-
play. A four beat loop at the current playback position is displayed.
2. Press the Deck's PLAY button to trigger playback of the track.
On the display, you'll see a four beat loop, based on the detected BPM value, which serves as a
reference for manual Beatgrid adjustments. While playing back the track, a white position
pointer cycles through, indicating the relative sync position within the loop. In the background,
the entire track is played back and the red playhead travels across the waveform displayed be-
low the loop.
Beatgrid Interactions
While the track is playing with Beatgrid Mode enabled:
►
Press the Performance Mode buttons to select the desired parameter OFFSET, BPM, FINE, or
SCAN in the Footer.
►
When OFFSET is selected rotate the LOOP encoder to shift the entire waveform underneath
the Beatgrid. Align the first Beatmarker with the first peak in the loop's waveform.
Using Your S5—Getting Advanced
Working with Beatgrids
TRAKTOR KONTROL S5 - Manual - 135