User Manual
Table Of Contents
- Title Page
- Disclaimer
- Contact
- Table of Contents
- Welcome to the World of TRAKTOR KONTROL D2!
- Using Your D2—Getting Started
- Using Your D2—Getting Advanced
- Using Touch Strip
- Playing with Loops in HOTCUE Mode
- Playing with Loops in LOOP Mode
- Using FREEZE Mode
- Using FLUX Mode
- Remixing with Remix Decks
- Capturing Samples from Track Decks (Using Remix Mode)
- Adding FX
- Using Performance Modes on Remix Decks
- Using Step Sequencer Mode on Remix Decks
- Mixing Stem Files using Stem Decks
- Working with Beatgrids
- Hardware Reference
- Preferences Pane in TRAKTOR
- Troubleshooting - Getting Help
- Technical Specification
►
Press the FX Assign buttons A and C again.
3.8.2 Setting up an FX Unit to Group FX Mode
When an FX Unit is set to Group FX mode, it allows up to three different audio effects to be
used simultaneously within an FX Unit. The following section explains how to set up your own
Group FX, and how to control its three effects via the FX knobs and FX buttons.
Prerequisites
▪ The track "Techno 1" is loaded on Deck A. The track is playing and audible.
▪ All FX knobs of the FX Unit are set to center position.
Setting up the FX Unit to Group FX Mode
To load a Group FX into the FX Unit:
1. Press the FX SELECT button of the FX Unit at the top left of the D2.
The FX Unit 1 menu opens.
Using Your D2—Getting Advanced
Adding FX
TRAKTOR KONTROL D2 - Manual - 95