User Manual

Loop sizes can be changed in TRAKTOR's software preferences: Preferences>TRAK-
TOR KONTROL D2>Loop Mode Sizes>Loop.
3.3.2 Beatjumping
With the orange pads, you can jump forward or backward in the track by the amount prede-
fined as Beatjump size. By default, the orange pads 6 and 7 represent the Beatjump sizes of 1
beat backward and forward, whereas the beat-jump sizes of pad 5 and 8 are defined by the
Loop encoder.
To beat-jump within a track by 1 beat:
1. Press the PLAY button to start playback.
2. Press the LOOP button to enable LOOP mode.
The LOOP button lights up brightly and the pads also illuminate.
3. Press pad 6 to jump back by 1 beat. If doing so causes the Playhead to cross the bounda-
ries of an active Loop area, it continues to loop again.
4. Press pad 7 to jump forward by 1 beat. If jumped out of a loop, playback continues as
normal.
Beatjump sizes can be changed in TRAKTOR's software preferences: Preferen-
ces>TRAKTOR KONTROL D2>Loop Mode Sizes>Beatjump.
Using the Loop encoder to define Beatjump sizes in real time
By default, pad 5 and pad 8 skip position back and forward by the amount shown in the dis-
play as loop-size value. To change this value:
1. Turn the Loop encoder to define a Beatjump size between 1/32 of a beat and 32 beats.
The Loop size will change in the display.
Using Your D2—Getting Advanced
Playing with Loops in LOOP Mode
TRAKTOR KONTROL D2 - Manual - 65